Great!
"Great!"
SHIMANO
Adapter Forreste / Bagerste Caliper PM/PM SHIMANO SM-MA-F203P/P (+43 mm)
Producentref.: ISMMAF203PPA
Denne SHIMANO-adapter giver mulighed for at montere en Postmount-caliper på en fastgøring af samme standard. Den er designet til skiver med en diameter på...
Læs mere
Normalpris
9,99 €
Normalpris
Tilbudspris
9,99 €
Enhedspris
pr.
Kan ikke indlæse tilgængeligheden af afhentning
Beskrivelse
Denne SHIMANO-adapter giver mulighed for at montere en Postmount-caliper på en fastgøring af samme standard. Den er designet til skiver med en diameter på 203 mm.
Leveres med skruer.
Kompatibel med en PM 160 mm gaffel/ramme, til endelig PM 203 mm montering
Ref: 7977564668070
Egenskaber
Montering : PM> PM
Position : Forrest
Position : Bagerst
Position : Forrest og Bagerst
Tekniske oplysninger
Prisoplysninger
*
Overall rating: 4.848485 / 5 based on 33 reviews.
AI-Generated Review Summary
Summary topics
Review topics: ["finish", "assembly", "quality", "adapter", "fit", "spacers"].
Review highlights
Reviews
The perfect, affordable adapter
"Easy to install and good quality—I'm very satisfied. It's easier to install than the 160/180 adapter from the same brand."
Simply the best
"Fitted for a 203mm rotor on a 160mm hub. Excellent—Shimano quality, no complaints!"
.
"No complaints, does the job, well-made, happy with the purchase"
disk adapter
"Great product—perfect for adapting a 160 mm disc to a 203 mm disc"
A perfect fit
"Perfect and very easy to use for mounting a 203 mm rotor on a fork designed for a 160 mm rotor. The only downside is that the two screws needed to mount the brake caliper on the adapter are missing. The solution is to find 5x20 galvanized hex screws at a hardware store and install them using the original washers."
Perfect
"Perfect adapter. Installed on a RockShox fork to go from 160 to 203 mm. No complaints."
Adapter
"A handy adapter that lets you switch from a 180mm to a 200mm diameter at the front. Too bad the two screws included were too short, since the ones that came with the bike didn't have enough thread. I had to get two more screws."
Very good
"A great product and reasonably priced for upgrading a rear brake disc from 180 to 203 mm."
The best!
"No complaints—it does the job, and what's more, it can be mounted in the back even though it wasn't designed for that. I just had to file down the corner a bit... 30 seconds..."
