Gå til produktoplysninger
1 af 3
TUFO

Rørsdæk TUFO ELITE S3 700x23c Sort

Ideel til konkurrence, rørsdækket TUFO Elite S3 700x23c besidder utrolige tekniske egenskaber. Både komfortabelt og racet, er det også holdbart og tilbyder et højt... Læs mere
Normalpris 69,99 €
Normalpris Tilbudspris 69,99 €
Vis alle oplysninger

Beskrivelse

Ideel til konkurrence, rørsdækket TUFO Elite S3 700x23c besidder utrolige tekniske egenskaber. Både komfortabelt og racet, er det også holdbart og tilbyder et højt beskyttelsesniveau mod punktering.

Med sin karkasse på 210 TPI på siderne, 375 TPI på slidbanen og blot 225 g er Elite S3 skabt til hastighed. Det giver en smidig kørsel og en bemærkelsesværdig vejholdning.

På denne model finder man et Vectran™ Puncture Barrier-lag under slidbanen for at forhindre punkteringer og forbedre grebet i sving.

Ref: 7970325692582

Højdepunkter

Den strømlinede profil, ideel til løb ;

Vectran™ Puncture Barrier anti-punkteringslag ;

Komfort og manøvredygtighed fra det nye slidbånd ;

Holdbarheden.

Egenskaber

Dimension : 700x23

Aftagelig ventil : Ja

TPI : 210

TPI : 375

Tekniske oplysninger

Anvendelse: Konkurrence ;
Dimensioner: 28" / Bredde: 23 mm ;
Karkasse 210 TPI på flankerne / 375 TPI på løbebanen ;
Gummistyrkende anti-rivningsforstærkning ;
Punkteringsbeskyttende lag Vectran™ Puncture Barrier ;
Anbefalet tryk: 8-15 bar (115-220 psi).

Prisoplysninger

*Vejledende udsalgspris fra leverandør i februar 2024

Overall rating: 2.5 / 5 from 2 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

Extraordinary performance - do not judge before 3 outings

"Like all Tufo tubulars, the Elite S3 is a chamberless tubular. Or rather, the chamber is an internal membrane "vulcanized" with the tubular itself. Lots of advantages: 1 You can repair them with tools like a tubeless and give the hose a new lease of life by putting it on the front wheel where the pressure is lower (which limits the gap between the hole if you put 8 bars on the rear. ) 2 ' It never deflates because the membrane is watertight. 3 ' They seem firm on the first outing, but that's because the membrane (chamber) is one with the tubular... but after 2 outings and the tubular wiggling due to rolling, it softens considerably and you get the perfect compromise between firmness, guidance, solidity and, above all, lateral efficiency. 4' Super-light, this Elite S3 returns superbly laterally without giving off that shamallow effect that I find unpleasant on all the top tubulars on the market. (If you inflate them too much, they bounce back, and if you don't inflate them enough, you get the shamalow effect. An Italian Conti pro team riding Tufo told me they share the same feeling... they ride Tufo... so only they can judge. ) 6 - Inflating: For me, 64 kg naked and 1m79: 7. 9 to 8. 1 baes max on the rear and on the front you can inflate it almost with 1 bar less if you feel like it. (. the rear of your bike will be hyper dynamic when dancing while remaining guided on curves and passes. ) For tubular inflation (I've been rolling tires and tubulars since 1997, when the ste. was created), generally inflate the rear with 1.3 bar more than a tire (e.g. if you inflate a 25C tire with 6.6 bar, inflate the rear with 7.9 bar max, or even 8.1 bar with a 25C Tufo tubular. ) 6 ' Tufo hoses are the easiest to assemble on the market. they center themselves. So I'm not waiting for Tufo to get the patent for the new low rolling resistance rubber compounds. Even without this, in 25 C they're almost as effective due to the herringbone structure of the sidewalls. Even the S33 pro in 25 C at 30 Euros, albeit at 310 gr, goes well over hard passes and rolls superbly... ... with this precise inflation."

Amoten (4/5)

A catastrophe, these casings

"VERY fragile I went through 4 of these hoses and all punctured in less than 2000 km . Not happy at all with these hoses."

Factory22 (1/5)

Q&A