Μετάβαση στις πληροφορίες προϊόντος
1 από 1
TOPEAK

Χειροκίνητη Αντλία TOPEAK MINI DUAL G Μαύρη

Κωδ. κατασκευαστή: TO4086
Μικρή σε μέγεθος, μεγάλη σε αποτελεσματικότητα! Πολύ καλή σχέση ποιότητας-τιμής για αυτή την αντλία Mini Master Blaster G που είναι ένα απαραίτητο εργαλείο της... Διαβάστε περισσότερα
Κανονική τιμή 21,19 €
Κανονική τιμή Τιμή προσφοράς 21,19 €
Προβολή όλων των λεπτομερειών

Περιγραφή

Μικρή σε μέγεθος, μεγάλη σε αποτελεσματικότητα!

Πολύ καλή σχέση ποιότητας-τιμής για αυτή την αντλία Mini Master Blaster G που είναι ένα απαραίτητο εργαλείο της μάρκας TOPEAK και εξασφαλίζει διπλή δράση φουσκώματος κατάλληλη για τον Δρόμο ή για το MTB.


 

 

Ref: 7970455945382

Βασικά χαρακτηριστικά

Σώμα από αλουμίνιο

Μοχλός ασφάλισης συμβατός με Presta ή Schrader

Εργονομικός σχεδιασμός

Αντιλασπωτικό καπάκι

Χαρακτηριστικά

Μανόμετρο : Αναλογικό

Υλικό σώματος : Αλουμίνιο

Για βαλβίδες : Presta

Για βαλβίδες : Schrader

Για βαλβίδες : Dunlop

Μέγιστη πίεση : 8,5 bar / 123 psi

Εύκαμπτη σύνδεση : Όχι

Βάση ποδηλάτου : Παρέχεται

Τεχνικές πληροφορίες

Παρέχεται με στήριγμα πλαισίου
Βάρος (κατασκευαστής): 158 g

Πληροφορίες τιμής

*Συνιστώμενη τιμή πώλησης προμηθευτή τον Φεβρουάριο 2024

Overall rating: 4.125 / 5 from 16 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["pressure", "quality", "pump", "inflation", "tire"].

Review highlights

Reviews

Super

"Easy to use and practical for reading tire pressure".

Vidjrm (5/5)

Attention

"In a few words: poor quality product! Out of order after 2 months of use( air leakage plus pressure) M. ... . to be polite."

Blackfoot (1/5)

Not suitable for road bikes

"Too bad, the pump does not inflate road tires to 7.5 bar. Road bike tire inflated to 6. 0 bar. Not suitable for road bike use. The pressure gauge is nevertheless handy".

Rafoul (1/5)

It pumps!

"Very practical and efficient! When you hold it in your hands it gives an impression of solidity, hence its weight too ."

Subaru. T. (4/5)

Practical, lightweight pump

"Very practical, lightweight pump that inflates efficiently in both directions".

Xtophe08 (5/5)

Perfect

"Small pump that does the job. It's always in my bag to deal with unexpected punctures".

Tomcativ (5/5)

Works very well, very limited instructions

"I'm using it for my Presta tires and this is the 1st time I've used a pump. I found it very difficult to understand how to change the pump in the right configuration as the instructions are particularly limited. The rubber part to change direction is the same color, so it's hard to see, but also hard to remove. Once the system is in place, the pump is easy to use and efficient. The graduations are inside and sufficiently visible."

Gneu (4/5)

Beautiful finish

"Bought to replace a small pump from the competition that was ideal for mountain biking, but for the VDR I needed something that went up more to 7/8 bar pressure. What's more, as I'm not a mind reader, I absolutely needed a scale to inflate my 25mm tire to 7 bars. I've nothing to say about the pump, it's a nice, solid, well finished piece that does its job, and what's more, it pumps in both directions. The graduation is on the inside, so it doesn't fade like on older models. However, it's a bit heavy, so "gram-accurate" aficionados should move on to a CO2 cartridge. One last thing, I had to modify the support (flatten it out) because of the almost square beam on my BMC Granfondo (which is angular) and put the pump on the left side. On the right side, because of its length, it touched the large chainring. In short, it suited me perfectly. After all, a pump can't go 100% on every frame. So 5/5 all the same, because top gear".

Seboon (5/5)

Quality product

"I gave it 4 stars because I don't think it swells fast enough. The rest is a quality product, especially considering the price. Nice touch with the Bar/Psi graduation".

Antho44 (4/5)

Inflates quickly, indicates correct pressure

"More weight than indicated! The +: - Allows you to quickly inflate a 26 section 2.00 tire (but you still need muscle ^^) - The cap took a while to accept to stay in place - the attachment is secured by Velcro - at least it works! The -s: - the pressure level display line is printed on the outer surface (why not on the inside?!), and gradually fades with pumping - the grip is moderately ergonomic (why not generalize the fold-out T-handle?!)".

Petito31 (5/5)

Q&A