Přejít na informace o produktu
1 z 3
SHIMANO

Kit Kabelů a Bowdenů Přehazovačky SHIMANO DURA-ACE 9100 Polymer Černý

Ref. výrobce: Y0BM98010
Tento kit kabelů a bowdenů SHIMANO Dura-Ace Polymer bude ideální pro výměnu kabeláže vašeho přenosu a dosažení výkonů na vysoké úrovni. Ocelové lanko z nerezové... Číst více
Běžná cena 39,99 €
Běžná cena Akční cena 39,99 €
Zobrazit všechny podrobnosti

Popis

Tento kit kabelů a bowdenů SHIMANO Dura-Ace Polymer bude ideální pro výměnu kabeláže vašeho přenosu a dosažení výkonů na vysoké úrovni.

Ocelové lanko z nerezové oceli má polymerový povlak, který mu umožňuje nabídnout nižší tření, a být tak výkonnější a trvanlivější.

Ref: 7970336080038

Hlavní přednosti

Kompletní sada ;

Předmazaná bowdenová hadička ;

Nerezový kabel s polymerovým povlakem ;

Výběr barvy ;

Výkonný a trvanlivý.

Vlastnosti

Délka kabelu : 1800 mm

Délka kabelu : 2100 mm

Technické informace

Obsah sady:
1 bowden 1,2 mm x 2100 mm ;
1 bowden 1,2 mm x 1800 mm ;
1 bovdenová bužírka 1700 mm ;
3 vnější zarážky s dlouhým jazýčkem ;
2 vnější zarážky s krátkým jazýčkem pro ST-9000 ;
1 zarážka pro zadní přehazovačku ;
2 vnitřní zarážky.

Informace o ceně

*Doporučená prodejní cena dodavatele v únoru 2024

Overall rating: 4.6666665 / 5 from 6 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["cable", "sleeve"].

Review highlights

Reviews

Excellent product

"I had shimano dura-ace levers in 9v, ultegra 10v and the original sheaths suited me just fine. I installed 11v levers in shimano 105, and I was not satisfied with the operation, very far from the previous excellent quality. That's why, after only 6 months, I installed this product: The result is incredible: I've got all the smoothness of the levers back, and the shifting is much improved. It's expensive, but it's really worth it."

— Jc38770 (5/5)

Good product

"Very good, the cables slide well into the sheaths."

— Steph (5/5)

#ERROR!

"It's all there for new wiring! Smooth and efficient!"

— Neness-Pro (5/5)

Good but difficult to install

"Caution: the polymer surface is fragile. During installation, you must be very careful not to pull on the cables as you would with standard cables, otherwise you will peel the polymer, which will end up clogging and the cable will no longer fit into the sheaths. Be sure to fit the plastic extension cable stops to the frame brackets. In short, it's all very well, but installation must be meticulous. Don't worry about the sheaths, they're long enough for a classic bike, and there's even extra ... . Of course, you'll need cable cutters and sheath cutters to do a proper job. Check that the sheath remains cylindrical in cross-section and, if necessary, use the pliers to straighten it. Don't forget to unblock the sheaths after cutting. To do this, use a small piece of piano wire or a small point, being very careful."

— Gigib (4/5)

Very good product

"Very good quality product but be careful, the sheath for the rear derailleur is too small ( for my bike )"

— Sebball (4/5)

Very good product

"Allows you to change gears smoothly and precisely. In combination with a good quality lever, it works very well. The best thing is to use a single length of sleeve between the lever and the derailleur, instead of several cut ends. This prevents water and dust from getting in, and extends the life of the product considerably."

— Nhungr (5/5)

Q&A