Hoppa till produktinformation
1 av 1
SRAM

Vevlagerhus SRAM DUB BSA 68/73 mm

Tillverkarens ref.: 00.6418.015.000
Avsedd för vevpaket från Sram eller Truvativ med Dub-teknik, det vevlagerhus SRAM Dub finns här i en version avsedd för ramar med vevlagerhusets standard... Läs mer
Ordinarie pris 31,79 €
Ordinarie pris Reapris 31,79 €
Visa alla detaljer

Beskrivning

Avsedd för vevpaket från Sram eller Truvativ med Dub-teknik, det vevlagerhus SRAM Dub finns här i en version avsedd för ramar med vevlagerhusets standard BSA 68-73 mm.

Utformat för att förenkla och öka tillförlitligheten hos gränssnittet ram/vevlagerhus, låter Dub-konceptet dig montera ditt Sram- eller Truvativ-vevpaket med denna teknik på i stort sett alla ramar på marknaden tack vare sitt universella system. Dessa vevpaket är nämligen kompatibla med alla de viktigaste standarderna för vevlagerhus, där den enda justeringsvariabeln är vevlagerhusets.
Utöver denna praktiska och ekonomiska aspekt uppvisar detta vevlagerhus en otrolig styvhet som garanterar bättre lagerfunktion och längre livslängd.


Ref: 7977591799974

Höjdpunkter

Dub-koncept som ger ökad styvhet, optimerat skydd mot smuts och kompatibilitet med de flesta ramar

Kompatibel med alla Sram- och Truvativ-vevpartier med Dub-konceptet;

Gutter Seal-teknologin förbättrar avsevärt tätningen mot väder och vind;

Förseglade patronlager;

En överdimensionerad axel för att fungera med alla standarder för vevlager.

Teknisk information

Färg: Svart
Axeldiameter: DUB
Vevlådsbredd: 68/73 mm
Lager: Rostfritt stål
Axeltyp: Genomgående
Vevlådstyp: BSC/BSA (Engelsk, Euro)
Kompatibel med alla Sram- och Truvativ-vevlådor med Dub-konceptet ;
Material: aluminium ;
Inkluderar 2x 2,5 mm BB frame BSA spacers, 1x 2,0 mm spacer (DS), 1x 3,0 mm spacer (DS), 1x 4,5 mm spacer (DS);
Kedjelinje: 45/49-52 eller 47,5 mm
Vikt (tillverkare): 76 g.

Prisinformation

*Leverantörens rekommenderade försäljningspris i februari 2024

Overall rating: 4.631579 / 5 based on 19 reviews.

AI-Generated Review Summary

Summary topics

Review topics: ["finish", "case", "key"].

Review highlights

Reviews

to replace the original one

"to replace the original one, which has taken quite a beating."

Serge P. (5/5)

Same as for the channel

"Same as for the channel"

Eric M. (5/5)

Top

"Top"

Jean-Pierre R. (5/5)

perfect for replacing my old one

"Perfect for converting my old mountain bike to a single-chainring setup"

Julien A. (5/5)

Great for your calves!!!

"Great for your calves!!!"

Olivier B. (5/5)

It does the job. Easy.

"It does the job. Easy to install. Too bad the instructions aren't very clear."

Robert N. (5/5)

The product is as described, and the delivery was flawless.

"The product was as described, and the delivery was flawless. I only installed the right-hand bearing, since the other one wasn't seized. Note: You'll need the right tool to remove and reinstall it."

Lpe76 (4/5)

DUB case

"This bottom bracket is slightly sturdier than the press-fit version; the choice depends on the bottom bracket shell on the frame."

Pierre80 (4/5)

Easy to install once you have the instructions

"I replaced the entire drivetrain and chose the SRAM DUB model for its broad compatibility. Although I didn't have the right tools to tighten the bottom bracket, tightening it by hand did the trick, and adjusting it with the included spacers and the (very handy) end cap allowed me to install the SRAM EAGLE DUB 32-tooth single-chainring crankset perfectly. I’m thrilled with it."

Anonymous (5/5)

Don't forget the wrench for assembly

"Installed on a BSA 73 without any issues, using the right key, of course"

Seb59 (4/5)

Q&A